BARRE DE CANAL EN ACIER INOXYDABLE
Stainless steel structural channel is often the choice for fabrication in applications of challenging environmental conditions where appearance and longevity is required. We offer 304/304L and 316/316L stainless channels in standard size ranges, both mill finish and polished.
Stainless Steel Channel T-304/304L is an excellent choice for its tensile strength, high resistance to rust, and high fabrication ability. Stainless steel channel is used for structural support products in a wide range of industries.
Properties: Corrosion resistance makes it an ideal material for chemical, petrochemical and waste treatment applications. High temperature resistance makes it ideal for use in cryogenic and high temperature processing applications. Surface finish makes it an ideal for food, medical and pharmaceutical manufacturing applications.
Common Uses: raceways, braces, frames to support equipment, machines, tanks, enclosures and housings.
| Produit | Barre de canal en acier inoxydable |
| la norme | ASTM A276, A484, A479, A580, A582, JIS G4303, JIS G4311, DIN 1654-5, DIN 17440, KS D3706, GB / T 1220 |
| Matériel | 301,303,304,304L, 304H, 309S, 310S, 314,316,316L, 316Ti, 317,321,321H, 329,330,347 etc. 201,409L, 410,416,420F, 430,431,440 etc. 2205,2507, S31803,2209,630,631,15-5PH, 17-4PH, 17-7PH, 904L, F51, F55, XM-27, et autres duplex, alliage Incoloy etc. |
| Surface | Mariné, pelé, satiné, souffle de sable, brillant, polissage, moulin, délié, etc. |
| La technologie | Laminé à chaud, soudé |
| Caractéristiques | Épaisseur: 3-12 mm ou au besoin Longueur: 5,8 m, 6 m ou au besoin |
| Tolérance | + -0,2% mm ou au besoin |
| Taille (mm) H × B | Epaisseur (mm) | ||||||||
| 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 12 | |
| 40 × 20 | 1.79 | ||||||||
| 50 × 25 | 2.27 | ||||||||
| 60 × 30 | 2.74 | 3.56 | 4.37 | 5.12 | |||||
| 70 × 35 | 3.23 | 4.21 | 5.17 | 6.08 | |||||
| 80 × 40 | 3.71 | 4.84 | 5.96 | 7.03 | |||||
| 90 × 45 | 4.25 | 5.55 | 6.83 | 8.05 | |||||
| 100 × 50 | 4.73 | 6.18 | 7.62 | 8.98 | 10.3 | 11.7 | 13.0 | 41.2 | |
| 120 × 60 | 9.20 | 10.9 | 12.6 | 14.2 | |||||
| 130 × 65 | 10.1 | 11.9 | 13.8 | 15.5 | 17.3 | 19.1 | |||
| 140 × 70 | 12.9 | 14.9 | 16.8 | 18.8 | 20.7 | ||||
| 150 × 75 | 13.9 | 16.0 | 18.1 | 20.2 | 22.2 | 26.3 | |||
| 160 × 80 | 14.8 | 17.1 | 19.3 | 21.6 | 23.8 | 28.1 | |||
| 180 × 90 | 16.7 | 19.4 | 22.0 | 24.5 | 27.0 | 32.0 | |||
| 200 × 100 | 18.6 | 21.6 | 24.5 | 27.4 | 30.2 | 35.8 | |||
Size & Tolerance
| Hot-rolled U channel bar | |||||||
|---|---|---|---|---|---|---|---|
| Section | La désignation | Mass | Section | La désignation | Mass | ||
| UPE80 | [80*50*4.5*8 | 8.89 | UPN65 | [65*42*5*7 | 7.09 | ||
| UPE100 | [100*55*5*8.5 | 10.9 | UPN80 | [80*45*6*8 | 8.64 | ||
| UPE120 | [120*60*5.5*9 | 13.2 | UPN100 | [100*50*6*8.5 | 10.6 | ||
| UPE140 | [140*65*6*9.5 | 15.7 | UPN120 | [120*55*7*9 | 13.4 | ||
| UPE160 | [160*70*6.5*10 | 18.6 | UPN140 | [140*60*7*10 | 16 | ||
| UPE180 | [180*75*7*10.5 | 21.6 | UPN160 | [160*65*7.5*10.5 | 18.8 | ||
| UPE200 | [200*80*7.5*11 | 24.8 | UPN180 | [180*70*8*11 | 22 | ||
| UPE220 | [220*85*8*12 | 28.8 | UPN200 | [200*75*8.5*11.5 | 25.3 | ||
| UPE240 | [240*90*8.5*13 | 33.4 | UPN220 | [220*80*9*12.5 | 29.4 | ||
| UPE270 | [270*95*9*14 | 38.8 | UPN240 | [240*85*9.5*13 | 33.2 | ||
| UPE300 | [300*100*9.5*15 | 44.5 | UPN260 | [260*90*10*14 | 37.9 | ||
| UPE330 | [330*105*11*16 | 53.3 | UPN280 | [280*95*10*15 | 41.8 | ||
| UPE360 | [360*110*12*17 | 61.2 | UPN300 | [300*100*10*16 | 46.2 | ||
| UPE400 | [400*115*13.5*18 | 72.3 | UPN320 | [320*100*14*17.5 | 59.5 | ||
| UPN30 | [30*33*5*7 | 4.27 | UPN350 | [350*100*14*16 | 60.6 | ||
| UPN40 | [40*35*5*7 | 4.87 | UPN380 | [380*102*13.5*16 | 63.1 | ||
| UPN50 | [50*38*5*7 | 5.59 | UPN400 | [400*110*14*18 | 71.8 | ||
| Specified Size of Stainless Channels, mm | Size Tolerances, Over and Under, mm. | ||||
|---|---|---|---|---|---|
| Flange Depth | Flange Width | Web Thickness for Thickness Given | Out-of-Square B of Either Flange, mm/ mm of Flange Width | ||
| To 5.00mm | Over 5.00mm | ||||
| To 38.00mm, incl. | 1.20 | 1.20 | 0.41 | 0.60 | 1.20 |
| Over 38.00 to 75.00mm, excl. | 2.40 | 2.40 | 0.60 | 0.80 | 1.20 |
Features
Anti-corrosion (the degree is susceptible to the alloys contained), heat-resistance, good cold and hot working properties, good toughness, good comprehensive performances and wide application.
Applications
Home appliances, electric appliances, construction materials, medical equipment, auto parts, petroleum, chemical application, agricultural irrigation, edible oil refinery factories, paper plants, shipyard, nuclear power plant etc.
